Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

NHH-65C-HG-R3BD

6-port Next Generation PerforMax™ sector antenna, 2x 698-894 and 4x 1695–2360 MHz, 65° HPBW, 3x RETs and 2x SBTs

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Powered by Andrew’s SEED® technology (Sustainable Energy Efficient Design)
  • Antenna optimized for higher gain with superior radiation efficiency
  • Designed to reduce SUB 1 alarm triggers with pattern consistency between low band and mid band
  • Superior patterns for enhanced interference mitigation resulting in improved SINR, higher throughput, and more capacity
  • Interleaved dipole technology results into an attractive, low wind load mechanical package
  • Internal SBTs allow remote RET control from the radio over the RF jumper cable
  • The low band array is internally diplexed for an independent tilt at 700 MHz and 850 MHz
  • Best in class PIM immunity

General Specifications

Antenna Type Sector with internal RET and bias tee
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Aluminum | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 4
RF Connector Quantity, low band 2
RF Connector Quantity, total 6

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal Bias Tee Port 1 | Port 3
Internal RET Low band (2) | Mid band (1)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0

Dimensions

Width 350 mm | 13.780 in
Depth 208 mm | 8.189 in
Length 2438 mm | 95.984 in
Net Weight, antenna only 36 kg | 79.366 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 798 MHz | 824 – 894 MHz | 1695 – 2360 MHz
Polarization ±45°
Total Input Power, maximum 800 W @ 50 °C

Electrical Specifications

R1 R2 Y1,Y2 Y1,Y2 Y1,Y2 Y1,Y2
Frequency Band, MHz 698–798 824–894 1695–1880 1850–1990 1920–2200 2200–2360
RF Port 1,2 1,2 3,4,5,6 3,4,5,6 3,4,5,6 3,4,5,6
Gain, dBi 16.3 16.1 19.1 19.6 19.6 19.7
Beamwidth, Horizontal, degrees 62 60 61 59 61 61
Beamwidth, Vertical, degrees 8.7 7.6 5.1 4.8 4.5 4.2
Beam Tilt, degrees 0–11 0–11 0–7 0–7 0–7 0–7
USLS (First Lobe), dB 16 15 15 18 19 20
Front-to-Back Ratio at 180°, dB 29 32 30 40 37 36
CPR at Boresight, dB 21 19 22 26 23 22
Isolation, Cross Polarization, dB 25 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 150 150 250 250 250 200

Mechanical Specifications

Wind Loading @ Velocity, frontal 425.0 N @ 150 km/h (95.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 361.0 N @ 150 km/h (81.2 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 900.0 N @ 150 km/h (202.3 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 451.0 N @ 150 km/h (101.4 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 456 mm | 17.953 in
Depth, packed 357 mm | 14.055 in
Length, packed 2585 mm | 101.772 in
Weight, gross 50.2 kg | 110.672 lb

Regulatory Compliance/Certifications

Agency Classification
UK-ROHS Compliant

General Specifications

Antenna Type Sector with internal RET and bias tee
Band Multiband
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Aluminum | Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, mid band 4
RF Connector Quantity, low band 2
RF Connector Quantity, total 6

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface 8-pin DIN Female | 8-pin DIN Male
RET Interface, quantity 2 female | 2 male
Input Voltage 10–30 Vdc
Internal Bias Tee Port 1 | Port 3
Internal RET Low band (2) | Mid band (1)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0

Dimensions

Width 350 mm | 13.780 in
Depth 208 mm | 8.189 in
Length 2438 mm | 95.984 in
Net Weight, antenna only 36 kg | 79.366 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 698 – 798 MHz | 824 – 894 MHz | 1695 – 2360 MHz
Polarization ±45°
Total Input Power, maximum 800 W @ 50 °C

Electrical Specifications

R1 R2 Y1,Y2 Y1,Y2 Y1,Y2 Y1,Y2
Frequency Band, MHz 698–798 824–894 1695–1880 1850–1990 1920–2200 2200–2360
RF Port 1,2 1,2 3,4,5,6 3,4,5,6 3,4,5,6 3,4,5,6
Gain, dBi 16.3 16.1 19.1 19.6 19.6 19.7
Beamwidth, Horizontal, degrees 62 60 61 59 61 61
Beamwidth, Vertical, degrees 8.7 7.6 5.1 4.8 4.5 4.2
Beam Tilt, degrees 0–11 0–11 0–7 0–7 0–7 0–7
USLS (First Lobe), dB 16 15 15 18 19 20
Front-to-Back Ratio at 180°, dB 29 32 30 40 37 36
CPR at Boresight, dB 21 19 22 26 23 22
Isolation, Cross Polarization, dB 25 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153 -153
Input Power per Port at 50°C, maximum, watts 150 150 250 250 250 200

Mechanical Specifications

Wind Loading @ Velocity, frontal 425.0 N @ 150 km/h (95.5 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 361.0 N @ 150 km/h (81.2 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 900.0 N @ 150 km/h (202.3 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 451.0 N @ 150 km/h (101.4 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 456 mm | 17.953 in
Depth, packed 357 mm | 14.055 in
Length, packed 2585 mm | 101.772 in
Weight, gross 50.2 kg | 110.672 lb

Regulatory Compliance/Certifications

Agency Classification
UK-ROHS Compliant