Warning Icon

For other alternatives, please contact us for more information.

0 Alternative products available

2SS-33A-R1

8-Port multibeam antenna ,8x 3100-4200 MHz , 4x 33° HPBW, 1x RET

Find a Partner
Specifications
Finish making your selections or clear them to view relevant specifications.
Features and Benefits
  • Enhances network capacity and spectrum utilization when used in six sector applications
  • Reduces antenna count to minimize Cap-Ex and Op-Ex costs – 3 antennas required for 6 sector configurations
  • Future proof-covers bands 42,43,48 plus C-Band and future CBRS expansions

General Specifications

Antenna Type Multibeam
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface AISG1 8-pin DIN Female | AISG1 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (1)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 301 mm | 11.850 in
Depth 181 mm | 7.126 in
Length 1100 mm | 43.307 in
Net Weight, without mounting kit 12 kg | 26.455 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 3100 – 4200 MHz
Polarization ±45°
Total Input Power, maximum 640 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 3100–3550 3550–3700 3700–4200
Gain, dBi 17.5 17.7 17.8
Beam Centers, Horizontal, degrees ±27 ±27 ±27
Beamwidth, Horizontal, degrees 38 36 34
Beamwidth, Vertical, degrees 9.9 9.1 8.5
Beam Tilt, degrees 2–12 2–12 2–12
USLS (First Lobe), dB 19 24 20
Front-to-Back Ratio at 180°, dB 32 32 31
Isolation, Cross Polarization, dB 25 25 25
Isolation, Inter-band, dB 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -145 -145 -145
Input Power per Port at 50°C, maximum, watts 80 80 80

Mechanical Specifications

Wind Loading @ Velocity, frontal 154.0 N @ 150 km/h (34.6 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 125.0 N @ 150 km/h (28.1 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 297.0 N @ 150 km/h (66.8 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 157.0 N @ 150 km/h (35.3 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 441 mm | 17.362 in
Depth, packed 337 mm | 13.268 in
Length, packed 1245 mm | 49.016 in
Weight, gross 23 kg | 50.706 lb

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant, Compliant/Exempted

General Specifications

Antenna Type Multibeam
Band Single band
Color Light Gray (RAL 7035)
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Low loss circuit board
Reflector Material Aluminum
RF Connector Interface 4.3-10 Female
RF Connector Location Bottom
RF Connector Quantity, high band 8

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2
RET Interface AISG1 8-pin DIN Female | AISG1 8-pin DIN Male
RET Interface, quantity 1 female | 1 male
Input Voltage 10–30 Vdc
Internal RET High band (1)
Power Consumption, active state, maximum 10 W
Power Consumption, idle state, maximum 2 W
Protocol 3GPP/AISG 2.0 (Single RET)

Dimensions

Width 301 mm | 11.850 in
Depth 181 mm | 7.126 in
Length 1100 mm | 43.307 in
Net Weight, without mounting kit 12 kg | 26.455 lb

Electrical Specifications

Impedance 50 ohm
Operating Frequency Band 3100 – 4200 MHz
Polarization ±45°
Total Input Power, maximum 640 W @ 50 °C

Electrical Specifications

Frequency Band, MHz 3100–3550 3550–3700 3700–4200
Gain, dBi 17.5 17.7 17.8
Beam Centers, Horizontal, degrees ±27 ±27 ±27
Beamwidth, Horizontal, degrees 38 36 34
Beamwidth, Vertical, degrees 9.9 9.1 8.5
Beam Tilt, degrees 2–12 2–12 2–12
USLS (First Lobe), dB 19 24 20
Front-to-Back Ratio at 180°, dB 32 32 31
Isolation, Cross Polarization, dB 25 25 25
Isolation, Inter-band, dB 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0
PIM, 3rd Order, 2 x 20 W, dBc -145 -145 -145
Input Power per Port at 50°C, maximum, watts 80 80 80

Mechanical Specifications

Wind Loading @ Velocity, frontal 154.0 N @ 150 km/h (34.6 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral 125.0 N @ 150 km/h (28.1 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum 297.0 N @ 150 km/h (66.8 lbf @ 150 km/h)
Wind Loading @ Velocity, rear 157.0 N @ 150 km/h (35.3 lbf @ 150 km/h)
Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 441 mm | 17.362 in
Depth, packed 337 mm | 13.268 in
Length, packed 1245 mm | 49.016 in
Weight, gross 23 kg | 50.706 lb
Click on image to enlarge.
Click on image to enlarge.

Regulatory Compliance/Certifications

Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
CHINA-ROHS Below maximum concentration value
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
UK-ROHS Compliant, Compliant/Exempted

Assembly Drawing

Product Specification

Assembly Drawing

Product Specification